We're doing it again! Buy an in-stock action plus an in-stock barrel and add a pre-fit job and we'll ship the pre-fit within two weeks. Shipping and Cerakote will add time.

.308 Short action right hand, right eject.
.068 firing pin

Kelbly's Atlas is a Remington semi-clone action, side bolt release, trigger hanger, Nitride finish action body, a fluted, black nitrided bolt, side bolt stop, 20 MOA anodized picatinny rail, a dual pin recoil lug, and a standard ball shaped knob. This action cut for Accuracy International center feed magazines. One of the key features of this action is the TG ejector, it is a mechanical ejector that does not put any chamber pressure on the round. It is also a “never fail” setup, meaning that there are no springs to get gummed up and stop working.

This action has a trigger hanger and there is little modification necessary to use a Remington 700/40x stock or chassis.

We're doing it again! Buy an in-stock action plus an in-stock barrel and add a pre-fit job and we'll ship the pre-fit within two weeks. Shipping and Cerakote will add time.

Long, mag bolt face, right hand, right eject.
.075 firing pin
Save
Kelblys Atlas is a Remington semi-clone action, side bolt release, trigger hanger, Nitride finish action body, a fluted, black nitrided bolt, side bolt stop, 20 MOA anodized picatinny rail, a dual pin recoil lug, and a standard ball shaped knob. This action has BDL feed lips for using a hinged floorplate or Accuracy International center feed magazines. One of the key features of this action is the TG ejector, it is a mechanical ejector that does not put any chamber pressure on the round. It is also a “never fail” setup, meaning that there are no springs to get gummed up and stop working.

This action has a trigger hanger and there is little modification necessary to use a Remington 700/40x stock or chassis.

We're doing it again! Buy an in-stock action plus an in-stock barrel and add a pre-fit job and we'll ship the pre-fit within two weeks. Shipping and Cerakote will add time.

Magnum LA action right hand, right eject.
.068 firing pin, 26.5oz weight
*** 75° bolt throw ***

Kelbly's Nanook is a Remington semi-clone action, side bolt release, trigger hanger, milled in 20moa pic rails, Nitride finish action body, a fluted, black nitrided bolt, side bolt stop, 20 MOA anodized picatinny rail, a dual pin recoil lug, and a standard ball shaped knob. This action cut for Accuracy International center feed magazines or ADL/BDL Wyatt's extended box. One of the key features of this action is the TG ejector, it is a mechanical ejector that does not put any chamber pressure on the round. It is also a “never fail” setup, meaning that there are no springs to get gummed up and stop working. bolt

This action has a trigger hanger and there is little modification necessary to use a Remington 700/40x stock or chassis.

We're doing it again! Buy an in-stock action plus an in-stock barrel and add a pre-fit job and we'll ship the pre-fit within two weeks. Shipping and Cerakote will add time.

Kelbly F Class Panda, Long action magnum bolt face, nitrided bolt, Right bolt/right port, sanded, flat boltface, TG ejector. 20MOA picatinny rail, trigger hanger, guard screws. Aluminum action body with steel thread insert, chrome moly fluted bolt, stainless bolt handle