|
|
|
|
|
|
Accuracy International Wrench Offset Drive Link
|
|
|
This Offset Drive Link must be used with the Bugholes Accuracy International action wrench if you have a fixed stock AND wish to use a ratcheting head wrench for torqueing. It is made from 4140 pre-hardened chrome moly steel and will adapt a 1/2" drive ratcheting wrench to the 5/8" hex on the AI wrench shaft. ***You do not need the Offset Drive Link if youre using a breaker bar with standard size socket, or having a folding stock ****
***200 Ft-Lbs MAX***
|
|
|
|
|
|
|
|
|
|
Thread Protector SS 5/8-24tpi
|
|
|
5/8-24 Stainless thread protector, .995 OD, 1.00 long, with a .3 dia blind hole. will accept a .700" tenon, approx .100" of thread relief with a .125 wide slot for applying torque via flat tool of you choice (the back of your pocket knife)
**** This is designed to be turned and blended to barrel diameter. ****
|
|
|
|
|
|
|
|
|
|
Thread Protector SS 1/2-28tpi
|
|
|
1/2-28 Stainless thread protector, .995 OD, 1.00 long, with a .3 dia blind hole. will accept a .700" tenon, approx .100" of thread relief, .125 wide slot for applying torque via flat tool of you choice (the back of your pocket knife)
**** This is designed to be turned and blended to barrel diameter. ****
|
|
|
|
|
|
|
|
|
|
Thread Protector SS 3/4-24tpi
|
|
|
3/4-24 Stainless thread protector, .995 OD, 1.00 long, with a .3 dia blind hole. will accept a .700" tenon, approx .100" of thread relief, .125 wide slot for applying torque via flat tool of you choice (the back of your pocket knife)
**** This is designed to be turned and blended to barrel diameter. ****
|
|
|
|
|
|
|
|
|
|
Foundation Butt spacer .475"
|
|
|
Aluminum .475" butt spacer for the Foundation stock length of pull system, this can replace the provided micarta spacers that come with the stock. Weighs 5.2 oz.
|
|
|
|
|
|
|
|
|
|
BUGNUT Barrel Nut 1.06" x 16 TPI 1.20" Breech
|
|
|
This is the BUG NUT barrel nut for use with the following actions:
Remington 700, Defiance, Surgeon, Stiller, and others with 1.06"x16 tenon threads.
This nut is used for barrels with a breech of 1.20"
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
|
|
|
|
|
|
BUGNUT Barrel Nut 1.06" x 16 TPI 1.25" Breech
|
|
|
This is the BUG NUT barrel nut for use with the following actions:
Remington 700, Defiance, Surgeon, Stiller, and others with 1.06"x16 tenon threads.
This nut is used for barrels with 1.25" breech dia
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
|
|
|
|
|
|
BUGNUT Barrel Nut 1.06" x 20 TPI 1.20" Breech
|
|
|
This is the BUG NUT barrel nut for use with the Savage small shank, Bighorn, and Mausingfield actions with 1.06"x20 tenon threads. This nut is designed for barrels with a breech of 1.20" or smaller.
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
|
|
|
|
|
|
BUGNUT Barrel Nut 1.06" x 20 TPI 1.25" Breech
|
|
|
This is the BUG NUT barrel nut for use with the Savage small shank, Bighorn, and Mausingfield actions with 1.06"x20 tenon threads. This nut is designed for larger breech barrels with a breech of 1.20" to 1.25".
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
|
|
|
|
|
|
BUGNUT Barrel Nut 1.06" x 18 TPI 1.20" Breech
|
|
|
This is the BUG NUT barrel nut for use with the following actions:
Atlas, BAT, and others with 1.06"x18 tenon threads.
This nut is used for barrels with a breech of 1.20"
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
