Home > Gunsmithing > Pre-fit Barrels
  • Pre-fit barrels have a lead time of approximately 6 weeks.
  • Price listed DOES NOT include the barrel price.**

BugNut Pre-fit $180

  • Can use any barrel contour but the Savage contours
  • Must use 1.200" or 1.250 breech barrels.
  • Can be used for R700, Defiance, Stiller, Surgeon, Bighorn, Kelblys Atlas tactical, Mausingfield, Savage small shank actions, etc...
  • 16, 18, and 20 TPI nuts available.
  • Breech face marked with chambering.
  • for use with the BugNut barrel nut only

Ruger Precision Rifle RPR pre-fit $200
  • 1.00x16 TPI in a variety of contours and manufacturers.
  • Breech face marked with chambering.

Savage, Bighorn, and Mausingfield 20TPI Pre-fit $160

  • Uses Savage barrel nut.
  • Must use Savage small shank contour barrels.
  • Breech face marked with chambering

Remage 16TPI Pre-fit$180

  • Must use small shank barrel contours only.
  • Uses Savage style barrel nut (with 16TPI threads).
  • Can be used for R700, Defiance, Stiller, Surgeon, etc.
  • Breech face marked with chambering.

Shouldered Pre-fit $275

  • Accuracy International AT, AX and AI MC actions.
  • Bighorn TL-2 and TL-3 actions
  • any manufacturer, any appropriate contour
  • Breech face marked with chambering.
  • action does not need to be present, headspace made to a standard

Shouldered, Timed, and Engraved Pre-fit $300

  • Any manufacturer, any contour.
  • ***These barrels are only made after handling and measuring an action by S.P.R. at one time.***
  • Curvature of bore timed, if necessary.
  • Properly placed engraving on the outside of barrel, above the stock line.