 |
- Pre-fit barrels have a lead time of approximately 8 weeks if we have the barrel.
- Price listed DOES NOT include the barrel price.**
BugNut Pre-fit $250
- Can use any barrel contour but the Savage contours
- Must use 1.200" or 1.250 breech barrels.
- Can be used for R700, Defiance, Stiller, Surgeon, Bighorn, Kelblys Atlas tactical, Tikka, Savage small shank actions, etc...
- 16, 18, and 20 TPI nuts available.
- Breech face marked with chambering.
- for use with the BugNut barrel nut only
Ruger Precision Rifle RPR 308 pre-fit $270, Magnum & 338 Lapua $320- 1.00x16 TPI in a variety of contours and manufacturers.
- Breech face marked with chambering.
Savage, Bighorn, and Mausingfield 20TPI Pre-fit $250
- Uses Savage barrel nut.
- Must use Savage small shank contour barrels.
- Breech face marked with chambering
Remage 16TPI Pre-fit$250
- Must use small shank barrel contours only.
- Uses Savage style barrel nut (with 16TPI threads).
- Can be used for R700, Defiance, Stiller, Surgeon, etc.
- Breech face marked with chambering.
Shouldered Pre-fit $325
- Accuracy International, Terminus, Defiance
- Bighorn/Zermatt, Impact 737, Curtis Custom
- any manufacturer, any appropriate contour
- engraved with chambering around breech circumference.
- action does not need to be present, headspace made to a standard
- Threads made to 3A GO standard
Shouldered, Timed, and Engraved Pre-fit $350
- Any manufacturer, any contour.
- ***These barrels are only made after handling and measuring an action by S.P.R. at one time.***
- Curvature of bore timed, if necessary.
- Properly placed engraving on the outside of barrel, above the stock line.
|
|
|
