|
|
|
|
 |
Accuracy International Wrench Offset Drive Link
|
|

This Offset Drive Link must be used with the Bugholes Accuracy International action wrench if you have a fixed stock AND wish to use a ratcheting head wrench for torqueing. It is made from 4140 pre-hardened chrome moly steel and will adapt a 1/2" drive ratcheting wrench to the 5/8" hex on the AI wrench shaft. ***You do not need the Offset Drive Link if youre using a breaker bar with standard size socket, or having a folding stock **** ***200 Ft-Lbs MAX***
|
|
 |
|
|
|
|
 |
Bugholes BugLug Precision Ground Stainless .250" Recoil Lug 1.065"
|
|

Bugholes BugLug Precision Ground Stainless .250" Recoil Lug with 1.065" bore. Pin hole for lug indexing is a blind 3/32" hole for a more finished look. Will fit Holland lug alignment tool.
|
|
 |
|
|
|
|
 |
Bugholes BugLug Precision Ground Stainless .250" Recoil Lug 1.077"
|
|

Bugholes BugLug Precision Ground Stainless .250" Recoil Lug with 1.077" bore for a larger diameter trued tenon. Pin hole for lug indexing is a blind 3/32" hole for a more finished look. Will fit Holland lug alignment tool.
|
|
 |
|
|
|
|
 |
Bugholes Lug Alignment Tool
|
|

Bugholes Lug Alignment Tool for Remington 700 and 1.350" diameter Rem 700 clones. Hard coat Anodized finish, designed to hold our Buglugs and Holland taper lugs. Includes 1/4-28 cap screw and washer.
|
|
 |
|
|
|
|
 |
Bugnut Wrench, std
|
|

The BugNut wrench is proprietary to the BugNut barrel nut, and will work with standard size BugNut barrel nuts (for R700, Savage, customs, etc). This wrench is NOT for use with the standard Tikka/ Ruger American BugNut It is a two piece wrench, and can be assembled over the nut to eliminate scrathing of the barrel. Has 1/2" square cutout for ratcheting wrench, torque wrench, or breaker bar
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
 |
|
|
|
|
 |
Bugnut Wrench small (Tikka/Ruger)
|
|

The small BugNut wrench is for the smaller nut used for Tikka and Ruger American BugNut pre-fits It is a two piece wrench, and can be assembled over the nut to eliminate scrathing of the barrel. Has 1/2" square cutout for ratcheting wrench, torque wrench, or breaker bar
*This wrench is only for Tikka/Ruger American small BugNut
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
 |
|
|
|
|
 |
Tikka Bugholes Action Wrench
|
|

This action wrench is for Tikka actions only. Made from 17-4PH Stainless, this is the last Tikka action wrench you'll need to buy **Will fit Right and Left handed actions.** **occasionally made from 4140 with a blackened finish due to 17-4 availability***
|
|
 |
|
|
|
|
 |
Remington 700 Style Bugholes Action Wrench
|
|

Remington 700 style action wrench fits Stiller, Defiance, Surgeon, Bighorn, Savage.....etc. made from 17-4PH Stainless, this is the last action wrench you'll ever need This is for right handed actions only**** **occasionally made from 4140 with a blackened finish due to 17-4 availability**
|
|
 |
|
|
|
|
 |
Remington 700 Style LEFTY Bugholes Action Wrench
|
|

Remington 700 style action wrench fits Stiller, Defiance, Surgeon, Bighorn, .....etc. made from 17-4PH Stainless, this is the last action wrench you'll ever need ****LEFT handed actions only**** **occasionally made from 4140 with a blackened finish due to 17-4 availability***
|
|
 |
|
|
|
|
 |
Sako TRG Bugholes Action Wrench
|
|

Sako TRG action wrench made from 17-4PH Stainless, this is the last action wrench you'll ever need for the TRG 22 or 42. **occasionally made from 4140 with a blackened finish due to 17-4 availability***
|
|
 |