|
|
|
|
|
|
BUGNUT Barrel Nut 1.06" x 16 TPI 1.20" Breech
|
|
|
This is the BUG NUT barrel nut for use with the following actions:
Remington 700, Defiance, Surgeon, Stiller, and others with 1.06"x16 tenon threads.
This nut is used for barrels with a breech of 1.20"
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
|
|
|
|
|
|
BUGNUT Barrel Nut 1.06" x 16 TPI 1.25" Breech
|
|
|
This is the BUG NUT barrel nut for use with the following actions:
Remington 700, Defiance, Surgeon, Stiller, and others with 1.06"x16 tenon threads.
This nut is used for barrels with 1.25" breech dia
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
|
|
|
|
|
|
BUGNUT Barrel Nut 1.06" x 20 TPI 1.20" Breech
|
|
|
This is the BUG NUT barrel nut for use with the Savage small shank, Bighorn, and Mausingfield actions with 1.06"x20 tenon threads. This nut is designed for barrels with a breech of 1.20" or smaller.
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
|
|
|
|
|
|
BUGNUT Barrel Nut 1.06" x 20 TPI 1.25" Breech
|
|
|
This is the BUG NUT barrel nut for use with the Savage small shank, Bighorn, and Mausingfield actions with 1.06"x20 tenon threads. This nut is designed for larger breech barrels with a breech of 1.20" to 1.25".
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
|
|
|
|
|
|
BUGNUT Barrel Nut 1.06" x 18 TPI 1.20" Breech
|
|
|
This is the BUG NUT barrel nut for use with the following actions:
Atlas, BAT, and others with 1.06"x18 tenon threads.
This nut is used for barrels with a breech of 1.20"
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
|
|
|
|
|
|
BUGNUT Barrel Nut 1.06" x 18 TPI 1.25" Breech
|
|
|
This is the BUG NUT barrel nut for use with the following actions:
Atlas, BAT, and others with 1.06"x18 tenon threads.
This nut is used for barrels with a breech of 1.25"
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
|
|
|
|
|
|
BUGNUT Barrel Nut 1.075" x 16 TPI 1.25" Breech
|
|
|
This is the BUG NUT barrel nut for use with Remington factory actions that have been trued by Southern Precision Rifles. 1.075"x16 tenon threads.
This nut is used for barrels with a breech of 1.25"
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
|
|
|
|
|
|
BUGNUT Barrel Nut Tikka/Ruger American Magnum 1" x 16 TPI 1.20" Breech
|
|
|
BugNut barrel nut for use with the following actions:
Tikka or Ruger American with 1"x16tpi tenon threads.
This nut is used for barrels with a breech of 1.20" it is the Magnum Tikka Bugnut
*** Uses the std BugNut wrench ***
***The Tikka/Ruger Bugnuts are not designed to work with factory barrels - only custom barrels cut to fit ***
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
|
|
|
|
|
|
BUGNUT Barrel Nut Tikka/Ruger American 1" x 16 TPI 1.055" Breech
|
|
|
BugNut barrel nut for use with the following actions:
Tikka and Ruger American with 1"x16tpi tenon threads.
This nut is used for barrels with a breech of 1.055" and is 1.180 in diameter
for small shank Savage/Remage contour barrels, uses the small BugNut wrench
*** The Tikka/Ruger Bugnuts are not designed to work with factory barrels - only custom barrels cut to fit ***
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
|
|
|
|
|
|
BUGNUT Barrel Nut M26x1.5mm 1.20" Breech
|
|
|
BugNut barrel nut for Howa and Weatherby Vanguard actions. M26x1.5mm for 1.20 breech dia barrels
Uses the standard BugNut wrench
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
