|
|
|
|
|
|
Thread Protector SS 5/8-24tpi
|
|
|
5/8-24 Stainless thread protector, .995 OD, 1.00 long, with a .3 dia blind hole. will accept a .700" tenon, approx .100" of thread relief
this is designed to be turned down and blended in to barrel diameter. .125 wide slot for applying torque via flat tool of you choice (the back of your pocket knife)
|
|
|
|
|
|
|
|
|
|
Thread Protector SS 1/2-28tpi
|
|
|
1/2-28 Stainless thread protector, .995 OD, 1.00 long, with a .3 dia blind hole. will accept a .700" tenon, approx .100" of thread relief
this is designed to be turned down and blended in to barrel diameter. .125 wide slot for applying torque via flat tool of you choice (the back of your pocket knife)
|
|
|
|
|
|
|
|
|
|
Thread Protector SS 3/4-24tpi
|
|
|
3/4-24 Stainless thread protector, .995 OD, 1.00 long, with a .3 dia blind hole. will accept a .700" tenon, approx .100" of thread relief
this is designed to be turned down and blended in to barrel diameter. .125 wide slot for applying torque via flat tool of you choice (the back of your pocket knife)
|
|
|
|
|
|
|
|
|
|
Badger Ordnance Thruster Muzzle Brake 5/8-24
|
|
|
Badger Ordnance thruster muzzle brake. 5/8-24tpi
1" round, 2.29" long
|
|
|
|
|
|
|
|
|
|
APA Little Bastard 3 Port 5/8-24tpi
|
|
|
APA Little Bastard, 3 port, 5/8-24 Stainless. This brake requires gunsmith installation, bore must be opened to desired safe size
|
|
|
|
|
|
|
|
|
|
Bugholes 2 Port BugBrake 6.5mm 5/8-24
|
|
|
Bugholes 2 port self-indexable 6.5mm muzzle brake. The ports on this brake are 90 degrees from centerline and 15 degrees up angle. Nitrided 416 Stainless and ready for you to self time to any 5/8-24 tenon with a .750" or larger shoulder. Brake body is .950" round and less than 2" long, the perfect size for most all mid sized cartridges
|
|
|
|
|
|
|
|
|
|
APA Fat Bastard 4 Port 5/8-24tpi
|
|
|
APA Fat Bastard, 4 port, 5/8-24 Stainless. This brake requires gunsmith installation, bore must be opened to desired safe size
|
|
|
|
|
|
|
|
|
|
APA Fat Bastard 4 Port 3/4-24tpi
|
|
|
APA Fat Bastard, 4 port, 3/4-24 Stainless. This brake requires gunsmith installation, bore must be opened to desired safe size
|
|
|
|
|
|
|
|
|
|
APA Little Bastard G2 3-Port 30cal 5/8-24tpi
|
|
|
APA Little Bastard GEN2, 3 port, 5/8-24. This brake is parkerized, has a self timing hex nut, and bore ready for 30 cal and smaller cartridges
|
|
|
|
|
|
|
|
|
|
APA Little Bastard G2 3-Port 6.5mm 5/8-24tpi
|
|
|
APA Little Bastard GEN2, 3 port, 5/8-24. This brake is parkerized, has a self timing hex nut, and bore ready for 6.5mm and smaller cartridges
|
|
|
|
