Zermatt Origin Short action, 223 bolt face, right bolt right port with 20 MOA picatinny rail. These actions have an extended ejection port and feed lips for use of a hinged floor plate or detachable mag. Floating controlled round feed bolt head, sliding plate extractor, mechanical ejector, savage small shank threads 1 1/16" x 20 TPI. Black nitrided finish

Zermatt Origin Short action, 308 bolt face, LEFT bolt LEFT port with 20 MOA picatinny rail. These actions have an extended ejection port and feed lips for use of a hinged floor plate or detachable mag. Floating controlled round feed bolt head, sliding plate extractor, mechanical ejector, savage small shank threads 1 1/16" x 20 TPI. Black nitrided finish.

**** Not cut for Wyatt's extended BDL box ****

Zermatt Origin Short action, 308 bolt face, right bolt right port with 20 MOA picatinny rail. These actions have an extended ejection port and feed lips for use of a hinged floor plate or detachable mag. Floating controlled round feed bolt head, sliding plate extractor, mechanical ejector, savage small shank threads 1 1/16" x 20 TPI. Black nitrided finish.

**** Not cut for Wyatt's extended BDL box ****

Zermatt Short action, MAG bolt face, right bolt right port with 20 MOA picatinny rail. These actions have an extended ejection port and feed lips for use of a hinged floor plate or detachable mag. Floating controlled round feed bolt head, sliding plate extractor, mechanical ejector, savage small shank threads 1 1/16" x 20 TPI. Black nitrided finish.

**** Not cut for Wyatt's extended BDL box ****

The OUTCAST is a precision bolt action designed specifically for building modern muzzle loading rifles. It is designed to use the Hankins Ignition System – Made by Hankins Precision Gun Parts (Standard Bolt Face [.473”] modules), or Arrowhead Rifles Gen 2 muzzleloader ignition system.

**** This is a serialized receiver and must be shipped to an FFL ****

The OUTCAST Action utilizes a “shell holder” type bolt face allowing the module to be conveniently loaded and unloaded. The bolt stop is positioned so the shell holder is always easy to get to and the solid bottom receiver prevents the module from falling into hard-to-reach areas. Additionally, the finer 20 T.P.I. thread allows for more hoop strength in the barrel. Comes with a 20moa pic rail.

.308 Short action right hand, right eject.
.068 firing pin

Kelbly's Atlas Lite is a Remington semi-clone action, side bolt release, Nitride finish action body, a fluted, black nitrided bolt, side bolt stop, a dual pin recoil lug, and a standard ball shaped knob. This action cut for Accuracy International AICS or AW magazines. One of the key features of this action is the TG ejector, it is a mechanical ejector that does not put any chamber pressure on the round. It is also a “never fail” setup, meaning that there are no springs to get gummed up and stop working.

There are dual locator scope base locator pin holes on the receiver bridge between the base screws.

.Magnum long action right hand, right eject.
.068 firing pin

Kelbly's Atlas Lite is a Remington semi-clone action, side bolt release, Nitride finish action body, a fluted, black nitrided bolt, side bolt stop, a dual pin recoil lug, and a standard ball shaped knob. This action cut for ADL/BDL or Accuracy International AICS magazines. One of the key features of this action is the TG ejector, it is a mechanical ejector that does not put any chamber pressure on the round. It is also a “never fail” setup, meaning that there are no springs to get gummed up and stop working.

There are dual locator scope base locator pin holes on the receiver bridge between the base screws.

Weighs 26oz

Long, mag bolt face, right hand, right eject.
.075 firing pin

Kelblys Atlas is a Remington semi-clone action, side bolt release, trigger hanger, Nitride finish action body, a fluted, black nitrided bolt, side bolt stop, 20 MOA anodized picatinny rail, a dual pin recoil lug, and a standard ball shaped knob. This action has BDL feed lips for using a hinged floorplate or Accuracy International center feed magazines. One of the key features of this action is the TG ejector, it is a mechanical ejector that does not put any chamber pressure on the round. It is also a “never fail” setup, meaning that there are no springs to get gummed up and stop working.

This action has a trigger hanger and there is little modification necessary to use a Remington 700/40x stock or chassis.

**** Introductory Pricing for a limited time! ****
Nitrided Defiance Classic Short action, 308 bolt face, right bolt right port, and pinned .253" recoil lug. Extended ejection port, swept bolt handle, mini M16 extractor, plunger ejector. 416 SS action body, 4340 chrome moly bolt, deep right spiral flutes, small (.062) firing pin. 20moa aluminum Pic rail, Remington style magwell with feed lips for hinged floorplates, Remington style rear tang, cut for the Wyatt's extended box

• 23.2 oz complete action weight with a Medium [short 700] action and the 20moa pic rail

**** Introductory Pricing for a limited time! ****
Nitrided Defiance Classic Long action, magnum bolt face, right bolt right port, and pinned .253" recoil lug. Extended ejection port, swept bolt handle, mini M16 extractor, plunger ejector. 416 SS action body, 4340 chrome moly bolt, deep right spiral flutes, small (.062) firing pin. 20moa aluminum Pic rail, Remington style magwell with feed lips for hinged floorplates, Remington style rear tang, cut for the Wyatt's extended box

• 24.4 oz complete action weight with a long action and the 20moa pic rail